Types of brake pads

HN1020 HEXEN Radiator stop leak

Characteristics: it is produced according to the special formula. This product forms elastic permanent cork, which is hold by roughness of crack walls. It surely pressurizes leak in gaskets, clamps, radiator and radiator sockets, thermostat, water pump, etc. Compatible with all kinds of antifreezes.

Application: warm engine up to the operation temperature having made sure that the thermostat and heating system switched on. Thoroughly shake up the bottle capacity. Pour the bottle capacity into the radiator or expansion chamber. Start the engine and let it work idling during 5-10 minutes, and then continue driving. Engine has to work during at least one hour after adding product into radiator. If during several days the leaks are not eliminated, then the mechanical repair will be needed. The effect will be better if you would use special cooling system cleaner (Hexen «Radiator flush») before. Don’t replace cooling liquid during one week after cooling system leak stopper application.

HN1021 HEXEN Radiator Flush

Characteristics: this means represents chemical scale reformer with active detergent oil and grease solvents. It cleans with guarantee the engine cooling system from scale, grease deposits, rust and antifreeze decay products. It possesses anticorrosion and antacid properties. Compatible with all coolant liquids.

Application: warm engine up to working temperature then stop it. Drain refrigerating fluid. Fill in the radiator with clean water and add Radiator Flush. Start the engine idling for 10-20 minutes. Stop the engine, pour out water, flush the system with flowing water, after this fill in the radiator with new coolant. The capacity of one bottle is enough for system with volume up to 10 litres.

HN1022 HEXEN Radiator Protection

Characteristics: special mixture, developed according to the new formula, which contains organic macromolecules, is purposed for protection of radiator and other parts of cooling system against rust and erosion, avoids foaming and appearance of air-lock. It helps to keep clean the cooling system and protects against boiling and cooling system leaking, prevents overheating of engine.

The product is high-performance, don’t harm environment. It is especially effective for avoiding of flaws and rusting of cooling system. Provides perfect lubricating of pump, compressors and thermostat, guaranties special defence of engines which works at high temperatures and made of aluminium alloys. It prevents wearing of cooling system rubber details. It is compatible with all kinds of cooling liquids (all kinds of antifreezes).

Application: warm engine up to working temperature then stop it. Thoroughly shake up the bottle. Pour the bottle capacity into the radiator or expansion chamber. Start the engine and let it work idling during 5-10 minutes, then continue driving or stop the engine. One bottle capacity is enough for cooling system with volume under 10 litres.