CATALOGUE

FULLSCREEN

Original Equipment Quality

Types of brake pads

HN1015 HEXEN Motor Protection

Characteristics: Additive for oil system of motor is purposed for comprehensive protection of engine, preventing of active oxidation and rapid loss of oil quality properties during the period between changings. Stabilizing content of additive for engine protection provides optimum level of antifriction, antioxidative and antiwear agents in oil, due to which friction and wearing are significantly reduced, service life of engine is increased, formation of scale, carbonaceous deposits and gumming of piston rings are avoided, promotes decreasing of oil consumption and reduction of exhaust gases toxicity. In case of regular usage optimum power and fuel consumption economy are provided, as well as easy starting under cold temperature. The additive is compatible with every of the motor oil types, is recommended for usage in gasoline and diesel engines as well as gas engines.

Application: add bottle content into warmed up to operation temperature engine. One bottle capacity is enough for lubrication system with volume under 6 litres. It is recommended to use it every time when changing oil.

HN1011 Oil Treatment

Characteristics: synthetic product designed to improve engine exploitation characteristics, reduce friction between moving elements, increase reliability and operation life, reduce noise. Prevents hit of oil into combustion chamber, formation of scale and fuming, which appears as result of cylinder – piston group and valve seals deterioration. Can be mixed with all synthetic, semi synthetic and mineral oils.

Application: in order to get better effect it is recommended to add into fresh motor oil. Add bottle content into warmed up to operation temperature engine through tank filler. One bottle capacity if enough for lubrication system with volume under 6 liters.

HN1012 Oil Stabilizer

Characteristics: high-tech additive, designed for pressure increasing in gasoline and diesel engines lubrication systems owning to the oil viscosity stabilization. Improves compression. Decreases noises during hydraulic compensators work. Reduces oil consumption for waste thanks to improving of oil sealing properties. It is recommended to use for engines with moderate and severe wear or on the condition of poor quality oil using. Is compatible with all kinds of motor oils.

Application: Add bottle content into warmed up to operation temperature engine. One bottle capacity is enough for lubrication system with volume under 6 liters. Is applied at any time if necessary.

HN1010 HEXEN Motor Flush 10-minute

Characteristics: effective detergent. It is used for soft cleaning of engine lubricating system and friction surfaces as well as for neutralization of deposits and contaminations inside engine lubrication system, dross and engine wearing products removing. Flushing liquid is neutral for rubber gaskets, stuffing-boxes, oil-control rings. Compatible with all kinds of motor oils. It is applied for cleaning of all gasoline and diesel engines with catalyst, turbocharging and without it.

Application: it is added to old motor oil. The content of one bottle pour into warmed up to the working temperature engine through the filter neck. Start engine idling for 10 minutes. Drain waste oil. Replace oil filter and fill the system with new oil. Capacity of one can is enough for 6-liters system.

Menu

Additives to lubricating systems

Additives for cooling system Additives for fuel systems Lubricants and other products Cabin care products and cleaners Car care products and cleaners BACK

(C) 2016 | HEXEN Automotive Systems